YouTube Facebook

Logwasher Range

PS 120 / PS 120R

Key Features

  • Designed to produce cleaner material at a faster rate
  • Specifically designed to work in the recycling industry, its versatility and design enables it to be easily adapted to work in gravel applications
  • Consists of a trough and two spiral axles running counter to one another with interchangeable blades which intensively mix the feed material
  • Friction from this process breaks down feed contaminates and allows scrubbed material to be stockpiled
Length (Inc Walkway)Width (Inc Walkway)Height (Inc Walkway)Feed HeightProduct Discharge HeightWaste Water Discharge HeightTotal Weight
PS 120 (Static) 9.70 m (31' 9") 2.99 m (9' 10") 3.60 m (11' 10") 2.69 m
(8' 10")
1.18 m (3' 11") 0.53 m (1' 9") 8500 kg (18750 lb)
PS 120 (Mobile) 13.9 m (45' 8") 3.00 m (9' 10") 3.98 m (9' 8") 2.95 m
(9' 8")
3.98 m (9' 8") 0.78 m (2' 7") 15200 kg (33550 lb)
PS 120R 13.23 m (43' 5") 3.70m (12' 2") 6.39 m (21') 4.81 m
(15' 9")
(6x2) 1.99 m (6' 6")
(8x4) 2.54 m (8' 4")
(6x2) 2.25 m (7' 5")
(8x4) 2.45 m (8' 1")
17000 kg (37500 lb)
Features & Benefits
  • Two high output electrical motors driving a gear system, which in turn rotates the two counter-rotating axles, which perform the scrubbing action
  • Interchangeable high tensile blades
  • The material forms a bed in the hull, preventing wear in the steel trough
  • The lower bearings are fresh water flushed to prevent wear or damage from small particles
  • The machines are fitted with an elevated spray bar system, which constantly adds water to the material. This washes the material and encourages lighter particles to float through the water exit
  • Full length walkway and steps, which can be fitted on either side of the machine, for ease of access and to view production
  • 4 lifting points firmly attached to the sides of the hull for carriage when required
  • Large inlet chute with bolt in wear plates
  • Rubber lined catchboxes and outlet chutes
  • Versatility and design enables it to be easily adapted to work in gravel applications
  • Low water consumption
  • Remote greasing to all bearings
  • Heavy-duty robust construction ideal for rugged operating environments
  • High capacity throughput
  • Freshwater inlet 3" nipple
Specific to PS 120R and PS 200R
  • Dewatering screens fitted to either end of the machine
  • Specifically designed to work in recycling applications to separate contaminates from saleable material
  • 8 x 4 (2.4m x 1.2m) dewatering screen removes excess water from material before final screening (specific to PS 120R only)
  • 12 x 5 (3.7m x 1.5m) dewatering screen removes excess water from material before final screening (specific to PS 200R only)
  • 6 x 2 (1.8m x 0.6m) dewatering screen separates lighter particles from the water on which it is floating
  • Built in agitation system allows for further small particle discharge water discharge side
  • Galvanized structure
  • Steel support with walkway, galvanized handrails, flow forge and access steps (single side walkway)
  • Walkway around back of trash screen
  • Adjustable working angle
  • 2 deck dewatering screen to produce 3 aggregate products

PS 200 / PS 200R

  • Designed to produce cleaner material at a faster rate
  • Specifically designed to work in the recycling industry, its versatility and design enables it to be easily adapted to work in gravel applications
  • Consists of a trough and two spiral axles running counter to one another with exchangeable blades which intensively mix the feed material
  • Water used in this process is recirculated to a water treatment facility
ProductWorking Length
(Inc Walkway)
Working Width
(Inc Walkway)
Working HeightFeed HeightProduct Discharge HeightWaste Water
Discharge Height
PS 200 16.8m (55' 2") 4.7m (15' 5") 5.9m (19' 4") 5.5m (18') 6 X 2 - 1.9m (6' 2")
8 X 4 2M (6' 5")
N/A
PS 200R 15.6m (51' 2") 3.8m (12' 4 ") 5.4m (17' 8") 5.4m (18' 8") 3.2m (10' 4") 2.7m (8' 8")
Features & Benefits
  • Two high output planetary drive gearboxes, directly driving two interlinked counter-rotating axles, which perform the scrubbing action
  • Interchangeable high tensile blades
  • The material forms a bed in the hull, preventing wear in the steel trough
  • The lower bearings are fresh water flushed to prevent wear or damage from small particles
  • The machines are fitted with an elevated spray bar system, which constantly adds water to the material. This washes the material and encourages lighter particles to float through the water exit
  • Full length walkway and steps, fitted around 2 sides of the machine, for ease of access and to view production
  • 4 lifting points firmly attached to the sides of the hull for carriage when required
  • Large inlet chute with bolt in breaker bar and rubber lining
  • Rubber lined catchboxes and outlet chutes
  • Versatility and design enables it to be easily adapted to work in gravel applications
  • Hull designed to reduce material build up in the trough
  • Low water consumption
  • Remote greasing to all bearings
  • Heavy-duty robust construction ideal for rugged operating environments
  • High capacity throughput, typically up to 200mtph
  • Freshwater inlet 4" nipple

Options

  • Custom height galvanized structure
  • Electric control panel
  • Standard logwasher on skid frame