Washing Equipment

Screenbox Range

084 ScreenBox

084

The Terex® Screenbox Range is designed for maximum production efficiency in applications including sand and gravel, coal, crushed stone, slag, recycled materials, concrete, iron ore and silica glass. The static structure carrying the screen unit is robust, easy to assemble and includes integrated material discharge chutes, walkways and access steps for access to view production and carry out maintenance.

  • Incorporates screenbox, chute, walkway and support structure
  • Designed for maximum production efficiency in applications including sand and gravel, coal, crushed stone, slag, recycle materials, concrete, iron ore and silica glass
  • All boxes are huck bolted to eliminate stress areas created by welding
  • The static structure which carries the screen unit is robust, easy to assemble and includes integrated material discharge chutes
  • Walkways, access steps and rolling chute system allow easy access to view production and carry out maintenance
8 x 4 Screenbox 2 & 3 Deck (4 Bearing)
Screenbox Size Width Length Height Electric Motor Water Feed Pipe Top Deck Spray Bars Bottom Deck Spray Bars Waste Water Discharge Product Discharge Height
2.4m x 1.2m (8' x 4') 4.02m (13' 2") 10.9m (35' 8") 5.99m (19' 8") 7.5hp 5kW 100mm (4") 5 off 5 off 2.85m (9' 4") 2.1m (6' 9")
Features & Benefits
  • Side tensioned screen box
  • Spray bars spread evenly on all decks
  • Plastic fan tail spray nozzles
  • Galvanized walkway & handrails
  • Rolling chute system
  • Manual screen angle adjustment
  • Electric drive
  • Steps and walkways provide easy access for maintenance
  • Steps can be placed at any corner of the structure
  • Rolling chute allows greater access to screen mesh when changing
  • Robust easy to assemble steel support structure
  • Rubber lined wear parts
  • Complies with all relevant essential health and safety requirements
  • High pressure plastic fan tail nozzles deliver clean end product
  • Huck bolted, four bearing, free floating vibrating system eliminates the need for fine tuning
  • High capacity (depending on mesh size and material type)
  • Low maintenance
  • 3 deck variant
  • Dry, rinser & part rinser
  • Level frame
  • Modular polyurethane decks
  • Rubber side tensioned mesh
  • Aluback wear plate in wash box
  • 10" Sand slurry pipes
  • Rubber lined catch box and division plates
  • Rubber lined transfer box
  • Adjustable division plates
  • Hydraulic drive (on certain models)
  • Brass or plastic nozzles
  • Height extensions to feed from the PS and FM ranges
  • Flipper plates in the rolling chute. Permitting blending of material grades

125 Screenbox

125

The Terex® Screenbox Range is designed for maximum production efficiency in applications including sand and gravel, coal, crushed stone, slag, recycled materials, concrete, iron ore and silica glass. The static structure carrying the screen unit is robust, easy to assemble and includes integrated material discharge chutes, walkways and access steps for access to view production and carry out maintenance.

  • Incorporates screenbox, chute, walkway and support structure
  • Designed for maximum production efficiency in applications including sand and gravel, coal, crushed stone, slag, recycle materials, concrete, iron ore and silica glass
  • All boxes are huck bolted to eliminate stress areas created by welding
  • The static structure which carries the screen unit is robust, easy to assemble and includes integrated material discharge chutes
  • Walkways, access steps and rolling chute system allow easy access to view production and carry out maintenance
  • The range includes 2 and 3 deck screens ranging from 8 x 4 (2.4m x 1.2m) to 20 x 6 (6m x 1.8m)
12 x 5 (3.7m x 1.5m) Width Length Height Electric Motor Water Feed Pipe Top Deck Spray Bars Middle Deck Spray Bars Bottom Deck Spray Bars Waste Water Discharge Product Discharge Height
3 Deck / 2 Bearing 4.07m (13' 5") 11.3m (37' 1") 7.04m (23' 1") 7.5hp 5kW 150mm (6") 6 off 6 off 6 off 2.8m (9' 2") 2.1m (6' 9")
2 Deck / 4 Bearing 4.07m (13' 5") 11.3m (37' 1") 6.3m (20' 8") 13hp 10kw 150mm (6") 6 off N/A 6 off 2.8m (9' 2") 2.1m (6' 9")
Features & Benefits
  • Side tensioned screen box
  • Spray bars spread evenly on all decks
  • Plastic fan tail spray nozzles
  • Galvanized walkway & handrails
  • Rolling chute system
  • Manual screen angle adjustment
  • Electric drive
  • Steps and walkways provide easy access for maintenance
  • Steps can be placed at any corner of the structure
  • Rolling chute allows greater access to screen mesh when changing
  • Robust easy to assemble steel support structure
  • Rubber lined wear parts
  • Complies with all relevant essential health and safety requirements
  • High pressure plastic fan tail nozzles deliver clean end product
  • Huck bolted, four bearing, free floating vibrating system eliminates the need for fine tuning
  • High capacity (depending on mesh size and material type)
  • Low maintenance
  • 3 deck variant
  • Dry, rinser & part rinser
  • Level frame
  • Modular polyurethane decks
  • Rubber side tensioned mesh
  • Aluback wear plate in wash box
  • 10" Sand slurry pipes
  • Rubber lined catch box and division plates
  • Rubber lined transfer box
  • Adjustable division plates
  • Hydraulic drive (on certain models)
  • Brass or plastic nozzles
  • Height extensions to feed from the PS and FM ranges
  • Flipper plates in the rolling chute. Permitting blending of material grades

165 Screenbox

165

The Terex® Screenbox Range is designed for maximum production efficiency in applications including sand and gravel, coal, crushed stone, slag, recycled materials, concrete, iron ore and silica glass. The static structure carrying the screen unit is robust, easy to assemble and includes integrated material discharge chutes, walkways and access steps for access to view production and carry out maintenance.

  • Incorporates screenbox, chute, walkway and support structure
  • Designed for maximum production efficiency in applications including sand and gravel, coal, crushed stone, slag, recycle materials, concrete, iron ore and silica glass
  • All boxes are huck bolted to eliminate stress areas created by welding
  • The static structure which carries the screen unit is robust, easy to assemble and includes integrated material discharge chutes
  • Walkways, access steps and rolling chute system allow easy access to view production and carry out maintenance
16 x 5 Screenbox
Screenbox Size Width Length Height Electric Motor Water Feed Pipe Top Deck Spray Bars Middle Deck Spray Bars Bottom Deck Spray Bars Waste Water Discharge Product Discharge Height
3 Deck / 2 Bearing 4.01m (13' 1") 13.3m (43' 6") 7.1m (23' 3") 20hp 15kW 150mm (6") 8 off 8 off 8 off 2.75m (8' 5") 1.85m (6' 1")
2 Deck / 4 Bearing 4.01m (13' 1") 13.3m (43' 6") 6.7m (22'-0') 20hp 15kW 150mm (6") 8 off N/A 8 off 2.75m (8' 5") 1.85m (6' 1")
Features & Benefits
  • Side tensioned screen box
  • Spray bars spread evenly on all decks
  • Plastic fan tail spray nozzles
  • Galvanized walkway & handrails
  • Rolling chute system
  • Manual screen angle adjustment
  • Electric drive
  • Steps and walkways provide easy access for maintenance
  • Steps can be placed at any corner of the structure
  • Rolling chute allows greater access to screen mesh when changing
  • Robust easy to assemble steel support structure
  • Rubber lined wear parts
  • Complies with all relevant essential health and safety requirements
  • High pressure plastic fan tail nozzles deliver clean end product
  • Huck bolted, four bearing, free floating vibrating system eliminates the need for fine tuning
  • High capacity (depending on mesh size and material type)
  • Low maintenance
  • 3 deck variant
  • Dry, rinser & part rinser
  • Level frame
  • Modular polyurethane decks
  • Rubber side tensioned mesh
  • Aluback wear plate in wash box
  • 10" Sand slurry pipes
  • Rubber lined catch box and division plates
  • Rubber lined transfer box
  • Adjustable division plates
  • Hydraulic drive (on certain models)
  • Brass or plastic nozzles
  • Height extensions to feed from the PS and FM ranges
  • Flipper plates in the rolling chute. Permitting blending of material grades

206 Screenbox

206

The Terex® Screenbox Range is designed for maximum production efficiency in applications including sand and gravel, coal, crushed stone, slag, recycled materials, concrete, iron ore and silica glass. The static structure carrying the screen unit is robust, easy to assemble and includes integrated material discharge chutes, walkways and access steps for access to view production and carry out maintenance.

  • Incorporates screenbox, chute, walkway and support structure
  • Designed for maximum production efficiency in applications including sand and gravel, coal, crushed stone, slag, recycle materials, concrete, iron ore and silica glass
  • All boxes are huck bolted to eliminate stress areas created by welding
  • The static structure which carries the screen unit is robust, easy to assemble and includes integrated material discharge chutes
  • Walkways, access steps and rolling chute system allow easy access to view production and carry out maintenance
20 x 6 Screenbox
Screenbox Size Width Length Height Electric Motor Water Feed Pipe Top Deck Spray Bars Middle Deck Spray Bars Bottom Deck Spray Bars Waste Water Discharge Product Discharge Height
3 Deck / 2 Bearing 4.71m (15' 6") 15.3m (50' 2") 7.8m (25' 3") 30hp 22kW 150mm (6") 10 off 8 off 8 off 2.34m (7' 6") 1.63m (5' 4")
2 Deck / 4 Bearing 4.71m (15' 6") 15.3m (50' 2") 7.36m (24' 2") 30hp 22kW 150mm (6") 10 off N/A 8 off 2.34m (7' 6") 1.63m (5' 4")
Features & Benefits
  • Side tensioned screen box
  • Spray bars spread evenly on all decks
  • Plastic fan tail spray nozzles
  • Galvanized walkway & handrails
  • Rolling chute system
  • Manual screen angle adjustment
  • Electric drive
  • Steps and walkways provide easy access for maintenance
  • Steps can be placed at any corner of the structure
  • Rolling chute allows greater access to screen mesh when changing
  • Robust easy to assemble steel support structure
  • Rubber lined wear parts
  • Complies with all relevant essential health and safety requirements
  • High pressure plastic fan tail nozzles deliver clean end product
  • Huck bolted, four bearing, free floating vibrating system eliminates the need for fine tuning
  • High capacity (depending on mesh size and material type)
  • Low maintenance
  • 3 deck variant
  • Dry, rinser & part rinser
  • Level frame
  • Modular polyurethane decks
  • Rubber side tensioned mesh
  • Aluback wear plate in wash box
  • 10" Sand slurry pipes
  • Rubber lined catch box and division plates
  • Rubber lined transfer box
  • Adjustable division plates
  • Hydraulic drive (on certain models)
  • Brass or plastic nozzles
  • Height extensions to feed from the PS and FM ranges
  • Flipper plates in the rolling chute. Permitting blending of material grades
Site Hosted By...MachineryTrader.com®
© Copyright by Sandhills Publishing Company 2017. All rights reserved. Reproduction of material appearing on this Web site is strictly prohibited without written permission. Machinery Trader and Machinery Trader Marketbook are registered trademarks of Sandhills Publishing Company.

Copyright & Legal Notice   |   Privacy Policy