Washing Equipment

Bucketwheel Range

T 100

  • Mobile screw recovery, twin bucket wheel designed units for the removal of clays, slits and slimes
  • Can produce up to 2 grades of sand
  • Designed to operate with maximum versatility and can support different requirements such as maximum retention of fines or maximum disposal of fines
  • Can be driven hydraulically from the M Range or from its own optional electric power pack
Wheel Diameter Spiral Diameter Spiral Length Weir Length Bucket Width No. Buckets Water Tank Capacity Water Flow Rate Working Length Working Width Working Height Total Weight Working
2.6m
(8' 6")
2.04m
(6' 9")
1.6m
(5' 3 ")
6.90m
(22' 7")
0.75m
(30")
28 off 8855L
(1948gls)
1360 - 2724L/m
(300-600Gpm)
5.62m
(18' 5")
3.72m
(12' 3")
3.51m
(11' 6")
14800kg
(32600lb)
Features & Benefits
  • Double & single grade chutes (plastic lined)
  • Slurry intake boxes (rubber lined)
  • High capacity variable speed twin bucket wheel
  • Deep fluted fines recovery screw with variable speed
  • 15hp electric / hydraulic powerunit (optional)
  • Adjustable plate between bucket and settling tank for release or retention of fines
  • High capacity depending on material size and type
  • Low running cost
  • Can produce one or two grades of material
  • Excellent fines recovery
  • Specially designed inlet boxes which reduce turbulence at entry.
  • Weir discharge system
  • Production of silt free material
  • Increased drainage time produces a drier product
  • Can be hydraulically coupled to TWS Mobile M Range
  • Boiler box for dry feed
  • Input boxes with 200mm (8") or 250mm (10") inlets
  • Electric hydraulic powerpack
  • Static unit without towbar and wheels

T 150

T150
  • Mobile bucket wheel dewaterer complete with retention screw
  • Can produce up to 2 grades of sand
  • Designed to operate with maximum versatility and can support different requirements such as maximum retention of fines or maximum disposal of fines
  • Can be driven hydraulically from the M Range or from its own optional electric power pack
Wheel Diameter Spiral Diameter Spiral Length Weir Length Bucket Width No. Buckets Water Tank Capacity Water Flow Rate Working Length Working Width Working Height Total Weight Working
2.75m
(9')
2.04m
(6' 9")
3.10m
(10' 2")
40m
(131' 2")
0.75m
(30")
28 off 10,637L
(2,340gls)
2270-5000L/m
(500-1100Gpm)
6.8m
(22' 5")
4.4m
(14' 3")
3.7m
(12')
14800kg
(32600lb)
Features & Benefits
  • Double & single grade chutes (plastic lined)
  • Slurry intake boxes (rubber lined)
  • High capacity variable speed twin bucket wheel
  • Deep fluted fines recovery screw with variable speed
  • 15 HP electric / hydraulic powerunit (optional)
  • Adjustable plate between bucket and settling tank for release or retention of fines
  • 6 point water injection system for agitation and floating off fines where necessary
  • High capacity 100-150mtph (110 - 165ustph) depending on material size and type
  • Low running cost
  • Can produce one or two grades of material
  • Excellent fines recovery
  • Specially designed inlet boxes which reduce turbulence at entry.
  • Weir discharge system adjustable from 0 - 40m (131ft) long.
  • Production of silt free material
  • Increased drainage time produces a drier product
  • Can be hydraulically coupled to TWS Mobile M Range
  • Breaks down into one 40" (12m) container
  • Double & single grade chutes (plastic lined)
  • Slurry intake boxes (rubber lined)
  • High capacity variable speed twin bucket wheel
  • Deep fluted fines recovery screw with variable speed
  • 15 HP electric / hydraulic powerunit (optional)
  • Adjustable plate between bucket and settling tank for release or retention of fines
  • 6 point water injection system for agitation and floating off fines where necessary
  • High capacity 100-150mtph (110 - 165ustph) depending on material size and type
  • Low running cost
  • Can produce one or two grades of material
  • Excellent fines recovery
  • Specially designed inlet boxes which reduce turbulence at entry.
  • Weir discharge system adjustable from 0 - 40m (131ft) long.
  • Production of silt free material
  • Increased drainage time produces a drier product
  • Can be hydraulically coupled to TWS Mobile M Range
  • Breaks down into one 40" (12m) container
Options
  • Boiler box for dry feed
  • Electric hydraulic powerpack
  • Static unit without towbar and wheels
  • No water injection system

T 200

T200
  • Can produce up to 1 grade of sand
  • Designed to operate with maximum versatility and can support different requirements such as maximum retention of fines or maximum disposal of fines
  • Can be driven hydraulically from the Mobile M Range or from its own optional electric power pack
Wheel Diameter Spiral Diameter Spiral Length Weir Length Bucket Width No. Buckets Water Tank Capacity Water Flow Rate Working Length Working Height Working Width Output Capacity Total Weight Working
4.57m
(15' 0")
2.05m
(6' 9")
4.26m
(14')
16m
(53')
635mm
(25")
54 off 20,430L
(4,500 gal)
2270-5000L/m
(500-1100Gpm)
8.46m
(27' 8")
4.6m
(15' 1")
2.7m
(8' 11")
150tph - 200tph 19,000kg
(41,800lbs)
Features & Benefits
  • Hydraulic drive from Mobile M Range
  • 4.57m (15') diameter bucket wheel (tandem buckets)
  • 2.05m (6'9") diameter fines recovery spiral 4.3m (14'3") long
  • Independent variable speed control on both bucket wheel and spiral
  • 54nr 635mm (25") wide corrosion resistant bucket meshes (10 x 5mm slotted)
  • Drainage butterfly valve
  • Discharge chute
  • Guards designed to comply with Machinery Directive
  • Emergency stops (4nr)
  • Tank capacity 20,430 litres (4,500 UK gallons) (5,400 US gallons)
  • 300mm high support legs
  • 11.0 tonnes unladen weight
  • Long fines recovery spiral with optional 1.5m extended spiral tank
Options
  • Electric hydraulic drive 7.5kW
  • Steel lined discharge chute
  • 1.5m main body and spiral extension
  • Dewatering screen complete with structure
Site Hosted By...MachineryTrader.com®
© Copyright by Sandhills Publishing Company 2017. All rights reserved. Reproduction of material appearing on this Web site is strictly prohibited without written permission. Machinery Trader and Machinery Trader Marketbook are registered trademarks of Sandhills Publishing Company.

Copyright & Legal Notice   |   Privacy Policy